Category: Intake Filters

Viledon PA/560 G-10 micron is a progressively structured diffusion media created by Viledon to optimize laminar air flow. Manufactured from thermally bonded synthetic fibers, Viledon’s diffusion media has set the standard in paint booth filtration world wide.

CDM-10 diffusion media provides ideal and superior diffusion intake air filitration for any and all downdraft and semi-downdraft booth intake filitration applications.  CDM-10 diffusion media is designed with synthetic non-woven fibers thermally bonded and 100 percent tackified, with a 99 percent capture rate on 10 micron particles.  CDM-10 diffusion media is available in any pre-cut size needed, in 66’ master rolls, or as a panel filter sewn to a 9-gauge internal wire frame for easy installation.  CDM-10 diffusion media performs at the same high level as any leading brand of diffusion media on the market today, and withstands temperatures exceeding 150 degrees.

Our R-1 diffusion intake panel provides the highest 10 micron efficiency for crossdraft booth intake filtration, and also is recommended for use in certain models of downdraft paint booth ceiling filter applications.  The R-1 diffusion panel provides an unmatched capture rate of 98 percent on 10 micron particles, and is heat sealed to a 9-gauge internal wire frame for easy installation.  Unlike our Series 55 and Series 66 intake panels, the R-1 diffusion panel is dry to touch, with tackifier applied in between the two layers of 100 percent polyester material, with a protective scrim-back on the air leaving side.  The R-1 diffusion panel can also withstand temperatures exceeding 150 degrees, making it a sensible solution in a downdraft booth that requires a self-supporting primary intake filter.  R-1 diffusion panels are available in standard sizes of 20”x20”, 20”x25”, 20”x46”, 20”x48”, 20”x50”, and 24”x24”.  They are also available as a linked panel depending on your specific needs.

Our Series 66 DustLoc tacky intake panel provides a greater 10 micron efficiency than the Series 55 tacky intake panel for crossdraft booth intake filitration.  We recommend this panel for use in higher dust areas or when a paint booth is located in close proximity to sanding and preparation areas.  The Series 66 panel provides a superb capture rate of 82 percent on 10 micron particles, and is heat sealed to a 9-gauge internal wire frame for easy installation.  It consists of two layers of 100 percent polyester material treated with a Dustlock tackifier on the air leaving side, with a total thickness of 2”.  Series 66 panels are available in standard sizes of 20”x20”, 20”x25”, 20”x46”, 20”x48”, 20”x50”, and 24”x24”.  They are also available as a linked panel depending on your specific needs.

Our Series 55 standard tacky intake panel is the industry standard for crossdraft booth intake filitration.  The Series 55 panel provides an excellent capture rate of 75 percent on 10 micron particles, and is heat sealed to a 9-gauge internal wire frame for easy installation.  It consists of two layers of 100 percent polyester material treated with tackifier on the air leaving side, with a total thickness of 1.5”.  Series 55 panels are available in standard sizes of 20”x20”, 20”x25”, 20”x46”, 20”x48”, 20”x50”, and 24”x24”.  They are also available as linked prefilter panels depending on your specific needs.